INTRO

Nanotechnology refers broadly to a field of applied science and technology whose unifying theme is the control of matter on the molecular level in scales smaller than 1 micrometre, normally 1 to 100 nanometers, and the fabrication of devices within that size range.

It is a highly multidisciplinary field, drawing from fields such as applied physics, materials science, colloidal science, device physics, supramolecular chemistry, and even mechanical and electrical engineering. Much speculation exists as to what new science and technology may result from these lines of research. Nanotechnology can be seen as an extension of existing sciences into the nanoscale, or as a recasting of existing sciences using a newer, more modern term.

Two main approaches are used in nanotechnology. In the "bottom-up" approach, materials and devices are built from molecular components which assemble themselves chemically by principles of molecular recognition. In the "top-down" approach, nano-objects are constructed from larger entities without atomic-level control. The impetus for nanotechnology comes from a renewed interest in colloidal science, coupled with a new generation of analytical tools such as the atomic force microscope (AFM), and the scanning tunneling microscope (STM). Combined with refined processes such as electron beam lithography and molecular beam epitaxy, these instruments allow the deliberate manipulation of nanostructures, and led to the observation of novel phenomena.

Examples of nanotechnology in modern use are the manufacture of polymers based on molecular structure, and the design of computer chip layouts based on surface science. Despite the great promise of numerous nanotechnologies such as quantum dots and nanotubes, real commercial applications have mainly used the advantages of colloidal nanoparticles in bulk form, such as suntan lotion, cosmetics, protective coatings, and stain resistant clothing.

Space-filling model of the nanocar on a surface, using fullerenes as wheels.

Graphical representation of a rotaxane, useful as a molecular switch.

This device transfers energy from nano-thin layers of quantum wells to nanocrystals above them, causing the nanocrystals to emit visible light. [1]

Origins

The first use of the distinguishing concepts in 'nanotechnology' (but predating use of that name) was in "There's Plenty of Room at the Bottom," a talk given by physicist Richard Feynman at an American Physical Society meeting at Caltech on December 29, 1959. Feynman described a process by which the ability to manipulate individual atoms and molecules might be developed, using one set of precise tools to build and operate another proportionally smaller set, so on down to the needed scale. In the course of this, he noted, scaling issues would arise from the changing magnitude of various physical phenomena: gravity would become less important, surface tension and Van der Waals attraction would become more important, etc. This basic idea appears feasible, and exponential assembly enhances it with parallelism to produce a useful quantity of end products.

The term "nanotechnology" was defined by Tokyo Science University Professor Norio Taniguchi in a 1974 paper (N. Taniguchi, "On the Basic Concept of 'Nano-Technology'," Proc. Intl. Conf. Prod. Eng. Tokyo, Part II, Japan Society of Precision Engineering, 1974.) as follows: "'Nano-technology' mainly consists of the processing of, separation, consolidation, and deformation of materials by one atom or by one molecule." In the 1980s the basic idea of this definition was explored in much more depth by Dr. K. Eric Drexler, who promoted the technological significance of nano-scale phenomena and devices through speeches and the books Engines of Creation: The Coming Era of Nanotechnology (1986) and Nanosystems: Molecular Machinery, Manufacturing, and Computation, (1998, ISBN 0-471-57518-6), and so the term acquired its current sense.

Nanotechnology and nanoscience got started in the early 1980s with two major developments; the birth of cluster science and the invention of the scanning tunneling microscope (STM). This development led to the discovery of fullerenes in 1986 and carbon nanotubes a few years later. In another development, the synthesis and properties of semiconductor nanocrystals was studied. This led to a fast increasing number of metal oxide nanoparticles of quantum dots. The atomic force microscope was invented five years after the STM was invented. The AFM uses atomic force to see the atoms.

Fundamental concepts

One nanometer (nm) is one billionth, or 10^-9 of a meter. For comparison, typical carbon-carbon bond lengths, or the spacing between these atoms in a molecule, are in the range .12-.15 nm, and a DNA double-helix has a diameter around 2 nm. On the other hand, the smallest cellular lifeforms, the bacteria of the genus Mycoplasma, are around 200 nm in length. To put that scale in to context the comparative size of a nanometer to a meter is the same as that of a marble to the size of the earth^[1]. Or another way of putting it: a nanometer is the amount a man's beard grows in the time it takes him to raise the razor to his face^[2] .

Molecular nanotechnology: a long-term view

Molecular nanotechnology, sometimes called molecular manufacturing, is a term given to the concept of engineered nanosystems (nanoscale machines) operating on the molecular scale. It is especially associated with the concept of a molecular assembler, a machine that can produce a desired structure or device atom-by-atom using the principles of mechanosynthesis. Manufacturing in the context of productive nanosystems is not related to, and should be clearly distinguished from, the conventional technologies used to manufacture nanomaterials such as carbon nanotubes and nanoparticles.

When the term "nanotechnology" was independently coined and popularized by Eric Drexler (who at the time was unaware of an earlier usage by Norio Taniguchi) it referred to a future manufacturing technology based on molecular machine systems. The premise was that molecular-scale biological analogies of traditional machine components demonstrated molecular machines were possible: by the countless examples found in biology, it is known that billions of years of evolutionary feedback can produce sophisticated, stochastically optimised biological machines. It is hoped that developments in nanotechnology will make possible their construction by some other means, perhaps using biomimetic principles. However, Drexler and other researchers have proposed that advanced nanotechnology, although perhaps initially implemented by biomimetic means, ultimately could be based on mechanical engineering principles, namely, a manufacturing technology based on the mechanical functionality of these components (such as gears, bearings, motors, and structural members) that would enable programmable, positional assembly to atomic specification (PNAS-1981). The physics and engineering performance of exemplar designs were analyzed in Drexler's book Nanosystems. But Drexler's analysis is very qualitative and does not address very pressing issues, such as the "fat fingers" and "Sticky fingers" problems. In general it is very difficult to assemble devices on the atomic scale, as all one has to position atoms are other atoms of comparable size and stickyness.

Another view, put forth by Carlo Montemagno, is that future nanosystems will be hybrids of silicon technology and biological molecular machines. Yet another view, put forward by the late Richard Smalley, is that mechanosynthesis is impossible due to the difficulties in mechanically manipulating individual molecules. This led to an exchange of letters in the ACS publication Chemical & Engineering News in 2003.

Though biology clearly demonstrates that molecular machine systems are possible, non-biological molecular machines are today only in their infancy. Leaders in research on non-biological molecular machines are Dr. Alex Zettl and his colleagues at Lawrence Berkeley Laboratories and UC Berkeley. They have constructed at least three distinct molecular devices whose motion is controlled from the desktop with changing voltage: a nanotube nanomotor, a molecular actuator, and a nanoelectromechanical relaxation oscillator. An experiment indicating that positional molecular assembly is possible was performed by Ho and Lee at Cornell University in 1999. They used a scanning tunneling microscope to move an individual carbon monoxide molecule (CO) to an individual iron atom (Fe) sitting on a flat silver crystal, and chemically bound the CO to the Fe by applying a voltage.

Bottom-up approaches

These seek to arrange smaller components into more complex assemblies.

• DNA Nanotechnology utilises the specificity of Watson-Crick basepairing to construct well-defined structures out of DNA and other nucleic acids.
• More generally, molecular self-assembly seeks to use concepts of supramolecular chemistry, and molecular recognition in particular, to cause single-molecule components to automatically arrange themselves into some useful conformation.

Top-down approaches

These seek to create smaller devices by using larger ones to direct their assembly.

• Many technologies descended from conventional solid-state silicon methods for fabricating microprocessors are now capable of creating features smaller than 100 nm, falling under the definition of nanotechnology. Giant magnetoresistance-based hard drives already on the market fit this description, [2] as do atomic layer deposition (ALD) techniques.
• Solid-state techniques can also be used to create devices known as nanoelectromechanical systems or NEMS, which are related to microelectromechanical systems or MEMS.
• Atomic force microscope tips can be used as a nanoscale "write head" to deposit a chemical on a surface in a desired pattern in a process called dip pen nanolithography. This fits into the larger subfield of nanolithography.

Functional approaches

These seek to develop components of a desired functionality without regard to how they might be assembled.

• Molecular electronics seeks to develop molecules with useful electronic properties. These could then be used as single-molecule components in a nanoelectronic device. For an example see rotaxane.
• Synthetic chemical methods can also be used to create synthetic molecular motors, such as in a so-called nanocar.

Speculative

These subfields seek to anticipate what inventions nanotechnology might yield, or attempt to propose an agenda along which inquiry might progress. These often take a big-picture view of nanotechnology, with more emphasis on its societal implications than the details of how such inventions could actually be created.

• Molecular nanotechnology is a proposed approach which involves manipulating single molecules in finely controlled, deterministic ways. This is more theoretical than the other subfields and is beyond current capabilities.
• Nanorobotics centers on self-sufficient machines of some functionality operating at the nanoscale. There are hopes for applying nanorobots in medicine ^[3][4][5], but it may not be easy to do such a thing because of several drawbacks of such devices ^[6][7]. Nevertheless, progress on innovative materials and methodologies has been demonstrated with some patents granted about new nanomanufacturing devices for future commercial applications, which also progressively helps in the development towards nanorobots with the use of embedded nanobioelectronics concept^[8].
• Programmable matter based on artificial atoms seeks to design materials whose properties can be easily and reversibly externally controlled.
• Due to the popularity and media exposure of the term nanotechnology, the words picotechnology and femtotechnology have been coined in analogy to it, although these are only used rarely and informally.

Tools and techniques

Typical AFM setup. A microfabricated cantilever with a sharp tip is deflected by features on a sample surface, much like in a phonograph but on a much smaller scale. A laser beam reflects off the backside of the cantilever into a set of photodetectors, allowing the deflection to be measured and assembled into an image of the surface.

Nanotechnological techniques include those used for fabrication of nanowires, those used in semiconductor fabrication such as deep ultraviolet lithography, electron beam lithography, focused ion beam machining, nanoimprint lithography, atomic layer deposition, and molecular vapor deposition, and further including molecular self-assembly techniques such as those employing di-block copolymers. However, all of these techniques preceded the nanotech era, and are extensions in the development of scientific advancements rather than techniques which were devised with the sole purpose of creating nanotechnology and which were results of nanotechnology research.

Nanoscience and nanotechnology only became possible in the 1910s^{[citation needed]} with the development of the first tools to measure and make nanostructures. But the actual development started with the discovery of electrons and neutrons which showed scientists that matter can really exist on a much smaller scale than what we normally think of as small, and/or what they thought was possible at the time. It was at this time when curiosity for nanostructures had originated.

The atomic force microscope (AFM) and the Scanning Tunneling Microscope (STM) are two early versions of scanning probes that launched nanotechnology. There are other types of scanning probe microscopy, all flowing from the ideas of the scanning confocal microscope developed by Marvin Minsky in 1961 and the scanning acoustic microscope (SAM) developed by Calvin Quate and coworkers in the 1970s, that made it possible to see structures at the nanoscale. The tip of a scanning probe can also be used to manipulate nanostructures (a process called positional assembly). Feature-oriented scanning-positioning methodology suggested by Rostislav Lapshin appears to be a promising way to implement these nanomanipulations in automatic mode. However, this is still a slow process because of low scanning velocity of the microscope. Various techniques of nanolithography such as dip pen nanolithography, electron beam lithography or nanoimprint lithography were also developed. Lithography is a top-down fabrication technique where a bulk material is reduced in size to nanoscale pattern.

The top-down approach anticipates nanodevices that must be built piece by piece in stages, much as manufactured items are currently made. Scanning probe microscopy is an important technique both for characterization and synthesis of nanomaterials. Atomic force microscopes and scanning tunneling microscopes can be used to look at surfaces and to move atoms around. By designing different tips for these microscopes, they can be used for carving out structures on surfaces and to help guide self-assembling structures. By using, for example, feature-oriented scanning-positioning approach, atoms can be moved around on a surface with scanning probe microscopy techniques. At present, it is expensive and time-consuming for mass production but very suitable for laboratory experimentation.

In contrast, bottom-up techniques build or grow larger structures atom by atom or molecule by molecule. These techniques include chemical synthesis, self-assembly and positional assembly. Another variation of the bottom-up approach is molecular beam epitaxy or MBE. Researchers at Bell Telephone Laboratories like John R. Arthur. Alfred Y. Cho, and Art C. Gossard developed and implemented MBE as a research tool in the late 1960s and 1970s. Samples made by MBE were key to the discovery of the fractional quantum Hall effect for which the 1998 Nobel Prize in Physics was awarded. MBE allows scientists to lay down atomically-precise layers of atoms and, in the process, build up complex structures. Important for research on semiconductors, MBE is also widely used to make samples and devices for the newly emerging field of spintronics.

Newer techniques such as Dual Polarisation Interferometry are enabling scientists to measure quantitatively the molecular interactions that take place at the nano-scale.

Applications

Although there has been much hype about the potential applications of nanotechnology, most current commercialized applications are limited to the use of "first generation" passive nanomaterials. These include titanium dioxide nanoparticles in sunscreen, cosmetics and some food products; silver nanoparticles in food packaging, clothing, disinfectants and household appliances; zinc oxide nanoparticles in sunscreens and cosmetics, surface coatings, paints and outdoor furniture varnishes; and cerium oxide nanoparticles as a fuel catalyst. The Woodrow Wilson Center for International Scholars' Project on Emerging Nanotechnologies hosts an inventory of consumer products which now contain nanomaterials.

However further applications which require actual manipulation or arrangement of nanoscale components await further research. Though technologies currently branded with the term 'nano' are sometimes little related to and fall far short of the most ambitious and transformative technological goals of the sort in molecular manufacturing proposals, the term still connotes such ideas. Thus there may be a danger that a "nano bubble" will form, or is forming already, from the use of the term by scientists and entrepreneurs to garner funding, regardless of interest in the transformative possibilities of more ambitious and far-sighted work.

The National Science Foundation (a major source of funding for nanotechnology in the United States) funded researcher David Berube to study the field of nanotechnology. His findings are published in the monograph “Nano-Hype: The Truth Behind the Nanotechnology Buzz". This published study (with a foreword by Anwar Mikhail, Senior Advisor for Nanotechnology at the National Science Foundation) concludes that much of what is sold as “nanotechnology” is in fact a recasting of straightforward materials science, which is leading to a “nanotech industry built solely on selling nanotubes, nanowires, and the like” which will “end up with a few suppliers selling low margin products in huge volumes."

Health risks and environmental issues

There is growing body of scientific evidence which demonstrates the potential for some nanomaterials to be toxic to humans or the environment [3], [4], [5]. The smaller a particle, the greater its surface area to volume ratio and the higher its chemical reactivity and biological activity. The greater chemical reactivity of nanomaterials results in increased production of reactive oxygen species (ROS), including free radicals [6]. ROS production has been found in a diverse range of nanomaterials including carbon fullerenes, carbon nanotubes and nanoparticle metal oxides. ROS and free radical production is one of the primary mechanisms of nanoparticle toxicity; it may result in oxidative stress, inflammation, and consequent damage to proteins, membranes and DNA [7].

The extremely small size of nanomaterials also means that they are much more readily taken up by the human body than larger sized particles. Nanomaterials are able to cross biological membranes and access cells, tissues and organs that larger-sized particles normally cannot [8]. Nanomaterials can gain access to the blood stream following inhalation [9] or ingestion [10]. At least some nanomaterials can penetrate the skin [11]; even larger microparticles may penetrate skin when it is flexed [12]. Broken skin is an ineffective particle barrier [13], suggesting that acne, eczema, shaving wounds or severe sunburn may enable skin uptake of nanomaterials more readily. Once in the blood stream, nanomaterials can be transported around the body and are taken up by organs and tissues including the brain, heart, liver, kidneys, spleen, bone marrow and nervous system [14]. Nanomaterials have proved toxic to human tissue and cell cultures, resulting in increased oxidative stress, inflammatory cytokine production and cell death [15]. Unlike larger particles, nanomaterials may be taken up by cell mitochondria [16] and the cell nucleus [17], [18]. Studies demonstrate the potential for nanomaterials to cause DNA mutation [19] and induce major structural damage to mitochondria, even resulting in cell death [20], [21].

Size is therefore a key factor in determining the potential toxicity of a particle. However it is not the only important factor. Other properties of nanomaterials that influence toxicity include: chemical composition, shape, surface structure, surface charge, aggregation and solubility [22], and the presence or absence of functional groups of other chemicals [23]. The large number of variables influencing toxicity means that it is difficult to generalise about health risks associated with exposure to nanomaterials – each new nanomaterial must be assessed individually and all material properties must be taken into account.

In its seminal 2004 report Nanoscience and Nanotechnologies: Opportunities and Uncertainties, the United Kingdom's Royal Society recommended that nanomaterials be regulated as new chemicals, that research laboratories and factories treat nanomaterials "as if they were hazardous", that release of nanomaterials into the environment be avoided as far as possible, and that products containing nanomaterials be subject to new safety testing requirements prior to their commercial release. Yet regulations world-wide still fail to distinguish between materials in their nanoscale and bulk form. This means that nanomaterials remain effectively unregulated; there is no regulatory requirement for nanomaterials to face new health and safety testing or environmental impact assessment prior to their use in commercial products, if these materials have already been approved in bulk form.

The health risks of nanomaterials are of particular concern for workers who may face occupational exposure to nanomaterials at higher levels, and on a more routine basis, than the general public. According to the Center for Responsible Nanotechnology which describe themselves as "boosters for safe use of nanotechnology" [24]:

Molecular manufacturing allows the cheap creation of incredibly powerful devices and products. How many of these products will we want? What environmental damage will they do? The range of possible damage is vast, from personal low-flying supersonic aircraft injuring large numbers of animals to collection of solar energy on a sufficiently large scale to modify the planet's albedo and directly affect the environment. Stronger materials will allow the creation of much larger machines, capable of excavating or otherwise destroying large areas of the planet at a greatly accelerated pace. It is too early to tell whether there will be economic incentive to do this. However, given the large number of activities and purposes that would damage the environment if taken to extremes, and the ease of taking them to extremes with molecular manufacturing, it seems likely that this problem is worth worrying about. Some forms of damage can result from an aggregate of individual actions, each almost harmless by itself. Such damage is quite hard to prevent by persuasion, and laws frequently don't work either; centralized restriction on the technology itself may be a necessary part of the solution. Finally, the extreme compactness of nanomanufactured machinery will tempt the use of very small products, which can easily turn into nano-litter that will be hard to clean up and may cause health problems [25]. The site list numerous other risks and benefits.

The International Council on Nanotechnology maintains a database and Virtual Journal of scientific papers on environmental, health and safety research on nanoparticles. The database currently has over 2000 entries indexed by particle type, exposure pathway and other criteria.

The Project On Emerging Nanotechnologies currently lists 502 products that manufacturers have voluntarily identified that use nanotechnology [26]. No labeling is required by the FDA [27] so that number could be significantly higher.

The ongoing debate over nanofood safety and regulations has slowed the introduction of nanofood products, but research and development continue to thrive - though, interestingly, most of the larger companies are keeping their activities quiet (when you search for the term 'nano' or nanotechnology' on the websites of Kraft, Nestle, Heinz and Altria you get exactly zero results). Although the risks associated with nanotechnology in other areas, such as cosmetics and medicine, are equally blurry, it seems the difference is that the public is far less apt to jump on the nanotechnology bandwagon when it comes to their food supply Nanotechnology food coming to a fridge near you.

Broader societal implications and challenges

Beyond the toxicity risks to human health and the environment which are associated with first-generation nanomaterials, nanotechnology has broader societal implications and poses broader social challenges. Social scientists have suggested that nanotechnology's social issues should be understood and assessed not simply as "downstream" risks or impacts. Rather, the challenges should be factored into "upstream" research and decision making in order to ensure technology development that meets social objectives [28]. Many social scientists and organizations in civil society suggest that technology assessment and governance should also involve public participation [29], [30], [31], [32].

Some observers suggest that nanotechnology will build incrementally, as did the 18-19th century industrial revolution, until it gathers pace to drive a nanotechnological revolution that will radically reshape our economies, our labour markets, international trade, international relations, social structures, civil liberties, our relationship with the natural world and even what we understand to be human. Others suggest that it may be more accurate to describe change driven by nanotechnology as a “technological tsunami”. Just like a tsunami, analysts warn that rapid nanotechnology-driven change will necessarily have profound disruptive impacts. As the APEC Center for Technology Foresight observes:

If nanotechnology is going to revolutionise manufacturing, health care, energy supply, communications and probably defence, then it will transform labour and the workplace, the medical system, the transportation and power infrastructures and the military. None of these latter will be changed without significant social disruption. [33]

The implications of the analysis of such a powerful new technology remain sharply divided. Nano optimists, including many governments, see nanotechnology delivering:

• environmentally benign material abundance for all by providing universal clean water supplies
• atomically engineered food and crops resulting in greater agricultural productivity with less labour requirements
• nutritionally enhanced interactive ‘smart’ foods
• cheap and powerful energy generation
• clean and highly efficient manufacturing
• radically improved formulation of drugs, diagnostics and organ replacement
• much greater information storage and communication capacities
• interactive ‘smart’ appliances; and increased human performance through convergent technologies [34], [35].

Nano skeptics suggest that nanotechnology will simply exacerbate problems stemming from existing socio-economic inequity and unequal distributions of power, creating greater inequities between rich and poor through an inevitable nano-divide (the gap between those who control the new nanotechnologies and those whose products, services or labour are displaced by them). Skeptics suggest the possibility that nanotechnology has the potential to destabilise international relations through a nano arms race and the increased potential for bioweaponry; thus, providing the tools for ubiquitous surveillance with significant implications for civil liberties. Also, the skeptics believe it might break down the barriers between life and non-life through nanobiotechnology, redefining even what it means to be human [36], [37].

Does the FCC Regulate VoIP?

In June 2005 the FCC imposed 911 obligations on providers of “interconnected” VoIP services – VoIP services that allow users generally to make calls to and receive calls from the regular telephone network. You should know, however, that 911 calls using VoIP are handled differently than 911 calls using your regular telephone service. Please see our consumer fact sheet on VoIP and 911 services at www.voip911.gov for complete information on these differences.

In addition, the FCC requires interconnected VoIP providers to comply with the Communications Assistance for Law Enforcement Act of 1994 (CALEA) and to contribute to the Universal Service Fund, which supports communications services in high-cost areas and for income-eligible telephone subscribers.

Aspects of these considerations may change with new developments in internet technology. You should always check with the VoIP service provider you choose to confirm any advantages and limitations to their service.

How Do I Know If I have a VoIP phone Call?

If you have a special VoIP phone or a regular telephone connected to a VoIP adapter, the phone will ring like a traditional telephone. If your VoIP service requires you to make calls using your computer, the software supplied by your service provider will alert you when you have an incoming call.

FAQ

Can I use my Computer While I talk on the Phone?
In most cases, yes.

Can I Take My Phone Adapter with me When I Travel?
Some VoIP service providers offer services that can be used wherever a high speed Internet connection available. Using a VoIP service from a new location may impact your ability to connect directly to emergency services through 9-1-1. For additional information, see www.voip911.gov.

Does my Computer Have to be Turned on?
Only if your service requires you to make calls using your computer. All VoIP services require your broadband Internet connection to be active.

What Are Some disadvantages of VoIP?

What Are Some disadvantages of VoIP?
If you're considering replacing your traditional telephone service with VoIP, there are some possible differences:

• Some VoIP services don't work during power outages and the service provider may not offer backup power.

• Not all VoIP services connect directly to emergency services through 9-1-1. For additional information, see www.voip911.gov.

• VoIP providers may or may not offer directory assistance/white page listing

What Are Some Advantages of VoIP?

Some VoIP services offer features and services that are not available with a traditional phone, or are available but only for an additional fee. You may also be able to avoid paying for both a broadband connection and a traditional telephone line

If I have VoIP service, who can I call?

Depending upon your service, you might be limited only to other subscribers to the service, or you may be able to call anyone who has a telephone number - including local, long distance, mobile, and international numbers. If you are calling someone who has a regular analog phone, that person does not need any special equipment to talk to you. Some VoIP services may allow you to speak with more than one person at a time.

Is there a difference between making a Local Call and a Long Distance Call?

Some VoIP providers offer their services for free, normally only for calls to other subscribers to the service. Your VoIP provider may permit you to select an area code different from the area in which you live. It also means that people who call you may incur long distance charges depending on their area code and service.

Some VoIP providers charge for a long distance call to a number outside your calling area, similar to existing, traditional wireline telephone service. Other VoIP providers permit you to call anywhere at a flat rate for a fixed number of minutes.

What Kind of Equipment Do I Need

A broadband (high speed Internet) connection is required. This can be through a cable modem, or high speed services such as DSL or a local area network. A computer, adaptor, or specialized phone is required. Some VoIP services only work over your computer or a special VoIP phone, while other services allow you to use a traditional phone connected to a VoIP adapter. If you use your computer, you will need some software and an inexpensive microphone. Special VoIP phones plug directly into your broadband connection and operate largely like a traditional telephone. If you use a telephone with a VoIP adapter, you'll be able to dial just as you always have, and the service provider may also provide a dial tone.

How VoIP / Internet Voice Works

VoIP services convert your voice into a digital signal that travels over the Internet. If you are calling a regular phone number, the signal is converted to a regular telephone signal before it reaches the destination. VoIP can allow you to make a call directly from a computer, a special VoIP phone, or a traditional phone connected to a special adapter. In addition, wireless "hot spots" in locations such as airports, parks, and cafes allow you to connect to the Internet and may enable you to use VoIP service wirelessly.

INTRO

Voice over Internet Protocol (VoIP), is a technology that allows you to make voice calls using a broadband Internet connection instead of a regular (or analog) phone line. Some VoIP services may only allow you to call other people using the same service, but others may allow you to call anyone who has a telephone number - including local, long distance, mobile, and international numbers. Also, while some VoIP services only work over your computer or a special VoIP phone, other services allow you to use a traditional phone connected to a VoIP adapter.